Project 18 LED Ring 16 x WS2812 5050 RGB LED With Integrated Drivers

Shape model Ring
Use LED  16 Pcs 5050 RGB LED
IC Driver  WS2812

Size : 68*68mm
Voltage : DC4-7V
Communication interface:Single-wire communication

LED Controller

Digispark USB Development Board

The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way . Jump to INTO Electronics, or the when Perfect for the Arduino AN IS TOO Big TOO much or at The Digispark IS shipped the except for Fully Assembled at The TWO included Easy to Solder and headers. Here at The the specs are: Support for the Arduino the IDE at The 1.0+ (OSX / the Win / the Linux) the Power Via the USB or the Source External - 5V or 7-35v (Recommended 12V or less, Automatic Selection) the On-Board Regulator 5V 500mA Built-in the USB . 6 the I / O Pins (2 are Used for only the USB IF your Program actively communicates over the USB, otherwise you CAN use All. 6 the even IF you are Programming Via the USB) 8k the Flash Memory (the About 6K the After the bootloader) the I2C and the SPI (VIS the USI) the PWM ON 3 pins (More Possible the with Software the PWM) the ADC ON 4 pins power led and status

Specification:
Supports Arduino IDE 1.0+ (OSX/Win/Linux).
Can be Powered By USB, 5v or 7-35v external power (automaticlly match).
A 5V/500mA Regulator is on board.
Built-in USB (Serial debugging).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
8k Flash Memory (about 6k after bootloader).
I2C and SPI (vis USI).
PWM on 3 pins (more possible with Software PWM).
ADC on 4 pins.
Power LED and Test/Status LED (on Pin0).
Colour: gray
Material: metal
size: 85 2.5*2cm
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.                    

Price at tokopedia 20rb (almost 2 USD)

Project 17 How to put MB102 Breadboard Power Supply Module 3.3V/5V

in normaly we use ordinary DC adaptor 5v to turn on the circuit. but I only Have DC 9V charger, so I must buy MB 102 PS Module. easy snap in protoboard. the is have usb connection for 5V to arduino. just buy the cable data for arduino.  or use printer cable.


there is jumper that kan put in mode 5Volts or 3.3 volts   set default at 5v. if any module need 3.3v add bulit internal suc as ams 1117.  beware if any mistake modul can blown up damage if directly sunddenly accidentaly connect with 5v (forget to remove the jumper voltage)

come on visit pcbway.com and exchange your bean point here click left menu free gift shop.

also there are many coupons discount in end of this year ..   

see this for more detail https://www.pcbway.com/activity/christmas2019.html

Project 14 This June 2019 Reedem Gift From PCBWAY.COM

Thanks for the annyversary 5th PCBWAY.COM  come on go to that page
here the snapshot

click the banner celebrating 5th annyversary ( 1 june until 30 June 2019)

scrolling down you will be found many coupons discount and free gifts. My favourite is Playing Luckydraw Wheel just like this below.

click start then randomly click closed card, suprise you will gain the prize.

here i got from PCBWAY just pay the shipment  amount 12 dollar.  

Dont forget to follow Twitter and Facebook .

see ya in next projects byeeee.......

Project 13 Multipurpose 3x7cm DIY Universal Board printed in PCBWAY How to get that

Project 13  Multipurpose 3x7cm DIY Universal Board

This board was printed in PCBWAY. How to get that ? simpIy see it

dont do when your beans run out  :D

how to get beans ??..  share your  Project.. klic when review  your uploaded gerber.

omg...  my project abandon and burried since one year ago (30apr2018)  :-(

second project.. could you put default gto  rect 99x99mm  linewidth 0.1mm  ?? 

im too lazy to re upload it again.

Project 12 Dot Matrix LED 8x8

Project  No. : W58834ASC12
Gerber File : W56679ASR2_dot88.rar
Board type : Single PCB Panel Way :
Size : 50.2 x 50.8 mm
Material : FR-4 TG130 Thickness : 1.6 mm Min Track/Spacing : 6/6mil
Min Hole Size : 0.3 Solder Mask : Blue Silkscreen : White


this blue panel to replace ordinay 8x8 dot matrix. design ready, but need money or coupon to pay that shipcost $13  and print PCB with special Sponsor promo price 5 USD ( 10pcs 10x10cm). i wish i got coupon for free of charge .. be patient be patient...


finnaly i got the coupons, PCBWAY celebrate they Annyversary, and i able to pay my order at 1 july  thank you....

Lam

Project 11 Amplifier 68Watt tip31 tip32

welcome to my Project 11 

this is Power Amplifier 68Watt  use transistor tip31 tip32 code name kingmax
here the original design . This is use Pertinax oldies era 1990 dark red ( seem like dark chololate):

so i decided re draw from this circiut, i hopefull work, please feel free my friend download it and make any modification and improvement. i will glad if you can build more cool design.

https://www.pcbway.com/project/shareproject/kingmaxcomtech.html
Order ID: G203202  I Ordered  10/16/2018   then come at my office 10/31/2018

cool.. they did faster delivery than predicted before (sometime its takes one month)

here the design you can also download at PCBWAY DOT COM website.

special..order price $5    for size 10x10cm  here the new red hot high quality FR4 board

source W56679ASR1  only pcbwayer member can identify who is he :D. the last word mae conclusion :  PCBway could you create an other colorull o PCB ? Maroon or Pink (light red)
looks sweety n girly.. nice  prize .  my tric  i create grid to emulate  Pink

Project 10 LED MAtrix10x10

led matrix 10x10 module board for any purposes.  

I Need a designed who that have customized size. and PCBWay able to print just like this precisely. My design use ordinary led. if you got dead pixel simply replace one of that dead LED.
Strong PTH (Pad Trough Hole) because its use double side high quality FR4 Board. You wont easy to remove feet from Board. even you push down. several one layer board (with out PTH) will cause nail out the cooper track, yes easy damage by accident. if you heat this double layer, with enough tin top and bottom so they will locked each  other, hard to pull hard to push. when i drop this modul. i found LED still struggle hold the board , honesty several LEDs bend not  but NOT nail out.

 so what you waiting for? order this board via PCBWAY.COM i design below 10x10cm i means you got special price $5 in any color that you can select from list (perhaps you want red or blue, except purple is expensive one.)  come on PCBWAY give my more color selection.. i bored with this color,,  perhaps pink?  mixed color?  cyan , grey with yellow slik part footprint. or other alternative color, this is 2019.. that olor not fashionable any bore.. honesty my eye get bored :D 
please hear my suggestion.

Do you wanna modification this design ? please download gerber file at

https://www.pcbway.com/project/shareproject/W58834ASP10_led10x10.html

the scheme is very simple. connect all anoda to vertical line as Y row port and connect all kathoda line become X column port. its easy to find col1 untul col10  and row1 to row10

Bill Of Material 

need 100 pcs led .. prefer use red bright .5 mm

dont forget buy header connector 20 pin